Help Center

            Using Over The Air Firmware Update on 6000U, 5000C, 6000K, and 7000X Series Displays

            Our latest generation displays include an Over the Air (OTA) firmware update function that is built into the Android Settings menu.  Please note that this functionality requires the Android side of your Clear Touch display to be connected to the internet, either through hardwired Ethernet or using an optional WiFi Module.  OTA firmware updates are useful when your panel's Android OS is out of date, and the update is "non-destructive", meaning it will not wipe the OS of any installed Android apps or personal files.

            To access the OTA firmware update function, first navigate to your Android Home screen, select the "waffle" icon in the bottom right corner of the screen to see your installed apps, then select Settings.  6000K, 7000X, and 5000C Series displays will include a section near the bottom of the Settings Menu called System Update.  Select this option, and then select the Check update button.  If a firmware update is found, the OS will notify and you request confirmation.  Select Confirm and allow the update to run through.  Once complete, the display will restart and boot to the Android Home screen.

            On 6000U Series displays, you will find the OTA Firmware Update functionality by clicking the Settings icon on your Android Home Screen, then navigating to the bottom of the page and selecting About.  Select the Check update button in the top right hand corner of the screen, and confirm the update if a newer version is found.

            Please contact Clear Touch Support with any questions or concerns you may have.  You can reach our Support Line at 864-643-5045, or submit a Support Ticket at https://support.getcleartouch.com/portal/newticket
            Updated: 01 Jul 2019 07:28 AM
            Helpful?  
            Help us to make this article better
            0 0