USB-C cables for 6000K+ and 7000XE
Starting with our K+ panels we have added a USB-C input port. This can be a "one cable to rule them all" because it will pass video, audio, and wired ethernet connection. However, there are specifications that need to be carried by the cable in order for this to be achieved. We will share the specs that have found the most success.
For a Windows PC (10 or 11), The cable needs to support an output of 4K@60Hz
For Mac, the cable needs to be Thunderbolt 3 compatible.
Replacing Clear Touch WIFI Antennas on CTI PC Modules
Replacing Clear Touch WIFI Antennas on CTI PC Modules 1.The PC first needs to be removed from the panel to replace the antennas. Please make sure the panel is turned off from the rocker switch. 2. Lift the orange tab in the upward direction and pull ...
Panel Collage App Update Record
Please note that although some features are enabled with the panel application, they must also correspond with the software capabilities of the client (PC, iOS, MacOS, or Android device). V2.0 (available through the CT App Store for the 6000U series ...
Setting up Your Clear Digital SHO Stick
Out of the Box Contents: SHO Signage Player Stick, Micro USB Power Cable, Power Block, Remote Control, IR Receiver Cable (for use with Remote), HDMI Extender Cable Set Up 1. Connect Stick to the Power Supply (and also into a Power Source) 2. Connect ...
Connecting Bluetooth to Your Clear Touch Panel
**Please Note: Every Bluetooth Device is different. Please refer to your specific device's guide or manual on pairing that device with other devices.** Pairing Bluetooth on the Android Side of the Panel Click on Settings on the Android side of your ...
Internet Access on Android
Internet/Network access on the Android side of the panel can be provided in two ways: 1. Wired- Located on the underside of the panel inputs, you'll find the Ethernet port for a hard-wired network cable. Next, in Android, go to Apps, then Settings, ...