How to Find the IP Address and MAC Address on your Clear Touch

How to Find the IP Address and MAC Address on your Clear Touch

If you are ever looking to find the IP or MAC Address of your Clear Touch panel, this is the guide for you! While using the Android input on your Clear Touch panel, to find the IP and MAC address you can will need to access the Settings application. Once you have opened the Settings application you will then select either WiFi or Ethernet, however you have configured the internet to work on the panel. After selecting either WiFi or Ethernet, you will then select the three dots on the top right of the screen (6000U series) or the gear icon (6000K, 7000X and 5000C series), doing so will then display the IP and MAC address for the panel.


1. Select Settings



2. Select WiFi or Ethernet




3. Select 3 dots (6000U) or gear icon (6000K, 7000X, 5000C)





    • Related Articles

    • IP Panel Control Using Telnet

      Clear Touch panels can be controlled via IP commands sent through Telnet. This guide will walk through the steps to establish a simple Telnet connection and how to input commands. First, please contact Support and request steps for accessing the ...
    • Use the Clear Touch Interactive Panel as a Secondary Monitor in Extend Mode

      Using your Clear Touch Interactive Panel as a Secondary Monitor in Extend Mode ***For the best experience, we recommend mirroring or duplicating your display*** With Windows 10, Microsoft has given users the option of running multiple displays in ...
    • Clear Touch Software Network Requirements

      This document covers general network requirements for Clear Touch software and features, along with troubleshooting steps for common networking issues relating to the 6000 and 7000 Series.   OTA Firmware Updates Over the air firmware updates, ...
    • How to Calibrate Touch on Internal PC Module (Windows 10)

      How to Calibrate Touch on your Clear Touch Internal PC Module (Windows 10) 1. Go to the white Search Bar in the lower left corner of your Desktop. Click it and type "Control Panel." When Control Panel pops up in the right menu, click it. 2. When the ...
    • Clear Touch PC Module driver packages

      Below you will find a list of the driver packages for each of our Clear Touch PC models. There is a Setup.exe file included with each of the driver packages, you will only need to run that program to install the drivers automatically. Be sure to ...