Cannot Access BIOS for Internal PC Module
Being unable to access the BIOS is normally the result of upgrading from Legacy BIOS to UEFI.
This can be corrected by resetting the CMOS Battery on the motherboard of the PC Module
For PC Modules included with the 5000 series panels, the CMOS battery is attached to the motherboard with a 2-pin clip and tucked underneath the motherboard. This connection can be located in between the motherboard and the power board. (If the connection is not immediately visible on the top-side of the motherboard, then it is located on the underside and will require either a pair of curved tweezers, or by removing the motherboard from the PC Module case.) To reset the battery, simply disconnect the 2-pin clip from the motherboard, wait 10-15 seconds, and then reconnect the 2-pin clip.
For PC Modules included with the 6000 series, the CMOS battery is located on the motherboard, typically located underneath the CPU Cooling fans. Simply remove the battery for 10-15 seconds before reinserting it.
If you have any questions or concerns regarding the CMOS battery location, simply submit a trouble ticket through our main website at getcleartouch.com
How do I access the BIOS on the Panel's Internal PC Module?
1. After turning the panel on and Android has booted, you may pull up the Input menu and choose PC. (Once the PC input has been chosen the panel will give the Internal PC module a power on signal.) 2. At this time you may begin pressing F2 repeatedly ...
How do I access the Boot Options menu on the Panel's Internal PC Module?
1. After turning the panel on and Android has booted, you may pull up the Input menu and choose PC. (Once the PC input has been chosen the panel will give the Internal PC module a power on signal.) 2. At this time you may begin pressing F7 repeatedly ...
Installing Windows 10 on a Clear Touch Interactive PC Module
Clear Touch Interactive offers a range of Integrated PC Modules that can either be purchased pre-loaded with Windows 10 Pro or without an operating system. If you or your organization chooses to purchase your PC Module without an OS, you will need ...
PC Module Beep Codes
Please refer to this chart to decipher the beep code reported from your Clear Touch PC Module. This reference is for models PC25 and PC27. Beep Code cycle Sample Description 1 short BIOS normal startup 1 long - 3 short (high pitch) RAM error 1 long - ...
Fix for Clear Touch Interactive PC Module Shutting Down Using Netflix, Hulu, Amazon Prime, Etc.
If you have experienced your Clear Touch Interactive PC module shutting down and/or going to a black screen and displaying "No Signal" while using a streaming service such as Netflix, Hulu, Amazon Prime, Etc. This is a known issue that we have worked ...